Sony HDC-4300 4K/HD System Camera

Specifications

General
Power requirements: AC 240 V, 1.4 A (max.), DC 180 V, 1.0 A (max.), DC 12 V, 7 A (max.)
Operating temperature: -20°C to +45°C (-4°F to +113°F)
Storage temperature: -20°C to +60°C (-4°F to +140°F)
Mass: Approx. 5.0 kg (11 lb 0.37 oz) (unit only)

Camera section
Pickup device: 3-chip 2/3-inch type CMOS
Spectrum system: F1.4 prism
Built-in filters: ND: 1 : CLEAR, 2：1/4ND, 3：1/8ND, 4：1/16ND, 5：1/64ND CC: A : CROSS, B：3200K, C：4300K, D：6300K
Sensitivity: F8.0 (2000 lx, 89.9% reflection)
Signal-to-noise ratio: -62 dB (HD/59.94i)
Horizontal resolution: 2000 TV lines (at center) in 4K, 5% or higher modulation

Input/output connectors
BPU: Optical/electrical multi-connector (1)
Audio input (CH1, CH2): XLR-type 3-pin, female (1 each)
For MIC: -60 dBu (can be set to a value up to –20 dBu using the menu or from the HDCU2000/2500), balanced
For LINE: 0 dBu, balanced
Mic input: XLR-type 3-pin, female (x 1)
Return control: 6-pin (x1)
Prompter/Genlock: BNC (x1), 1 Vp-p, 75 Ω
Prompter 2: BNC (x1), 1 Vp-p, 75 Ω
DC input: XLR-type 4-pin (x1), DC 10.5 V to 17 V
DC output: 4-pin (x1), DC 10.5 V to 17 V, 0.5 A (max.) 2-pin (x1), DC 10.5 V to 17 V, 2.5 A (max.) (Limitations may apply, depending on the load and input conditions.)
Test out: BNC (x1)
SDI (1, 2): BNC (1 each)
SDI Monitor: BNC (x1)
Earphone: Stereo mini jack (x1)
Tracker: 10-pin (x1)
Crane: 12-pin (x1)
Intercom (1, 2): XLR-type 5-pin, female (1 each)
Remote: 8-pin (x1)
Network trunk: RJ-45 8-pin (x1)
Lens: 12-pin (x1)
Viewfinder: 20-pin (x1)
USB: USB 2.0, Type A, 4-pin (x1)

Supplied accessories
Supplied accessories: Operation manual (1), Cable clamp belt (1set), Number plates (1set), Screws (+B3x8) (2)