DJI Spreading Wings S1000 Premium Professional Octocopter

    • Designed to Carry DSLR-Sized Camera
    • Aluminum Mounts for Enhanced Durability
    • Collapsible Frame and Folding Props
    • Up to 24 Pound Take-Off Weight
    • Up 15 Minutes Flying at 15,000mAh
    • Low Gimbal Mounting with Dampening
    • Retractable Landing Gear
    • Supports A2 and WooKong-M FCs


    The Spreading Wings S1000 Premium Professional Octocopter from DJI is a collapsible, eight-propeller RC helicopter designed to carry a DSLR or similar-sized camera. The aircraft is intended to serve as a platform, allowing professional videographers and photographers to add dynamic aerial shots to their productions. It is designed to work with either the A2 or WooKong-M flight control systems, which are available separately.

    For stabilizing and moving a camera in flight, the S1000 Premium is compatible with any of the Zenmuse Z15 series gimbals. The airframe features a dampened gimbal mounting bracket with a low mounting position. Additionally, the landing gear can be raised, allowing an unobstructed 360° of visibility.

    The S1000 Premium is designed to use 6S lithium-polymer batteries. It will support capacities between 10,000 and 20,000mAh, and requires a discharge rate of at least 15C. With a 15,000mAh battery and a take-off weight of 21 pounds, it is estimated to fly approximately 15 minutes. 

    Note: Assembly is required and a flight control system is not included.

    Performance

    Take-Off Weight and Flying Time
    Weighing approximately 9.3 pounds, the S1000 Premium is able to support a take-off weight of up to 24 pounds. This means it can handle camera payloads up to the approximate size of a Canon EOS 5D Mark III. With a 21 pound take-off weight and a 15,000mAh battery it features an estimated flying time of approximately 15 minutes
    Propulsion System
    At the end of each prop arm is a 40A electronic speed controller (ESC). When combined with its 4114 pro motor and high performance 1552 folding propellers, it is capable of a maximum thrust of 5.5 pounds

    Camera Mounting

    Low Gimbal Mounting Position
    The S1000 Premium supports all of DJI's Zenmuse Z15 series gimbals for camera stabilization and control. The frame keeps the gimbal low, using a specially designed bracket. Additionally, the landing gear retract in flight so that full camera panning is possible
    Damping Design
    The gimbal and battery are mounted on the same bracket, with dampers placed between the bracket and the frame. This is designed to significantly reduce high-frequency vibrations to help make shots clearer and sharper. The battery tray's position also makes it more stable and accessible for mounting and dismounting

    Airframe Design

    Aluminum Construction for Key Parts
    The frame arm mounts, motor mounts, and other key parts of the airframe use aluminum rather than plastics or composites for enhanced robustness. Using aluminum helps ensure that if a crash does occur major structural damage will be avoided
    Foldable Propellers and Collapsible Frame
    All eight arms can be completely folded down and the 1552 folding propeller can be tucked away, minimizing the S1000's size for transportation. To fly, simply lift the frame arms up, lock them in place with the red clips, and power up the system
    Efficient V-Type Mixer
    The mixer in the S1000 Premium is designed to provide large amounts of propulsion while maintaining power efficiency. Acting in tandem with the flight control system, it will work to keep the aircraft stable and flying even after the loss of a rotor. Integrated into the center frame is a power distribution system using DJI's proprietary coaxial cable connector

    The mixer is designed to be easier to install or replace by eliminating the need for soldering. All frame arms as well as the retractable landing gear are made from carbon fiber, to help ensure a low weight profile and high structural stability
    Inclined Prop Arm
    Each prop arm features 8° inversion and a 3° inclination, making the aircraft more stable when rolling and pitching, and at the same time more flexible when rotating
    Sparkproof Plug
    The main power cord uses an AS150 sparkproof plug for positive and a XT150 plug for negative to prevent accidentally mixing up polarities, and preventing short circuits that could damage sensitive electronics
    Frame
    Construction Material Motor mounts, frame arm mounts, and other key structural components use aluminum for maximum durability
    Frame Arm Weight 11.5 oz / 325 g
    Center Frame Diameter 13.3" / 337.5 mm
    Center Frame Weight With Landing Gear Mounting Base and Servos: 46.9 oz / 1,330 g
    Landing Gear Dimensions L x W x H: 18.1 x 20.1 x 12" / 460 x 511 x 305 mm
    Top Width: 6.1" / 155 mm
    Motor
    Stator Size 41 x 14 mm
    Motor Velocity Constant Kv: 400 rpm/V
    Maximum Power Consumption 500 W
    Weight With Cooling Fan: 5.6 oz / 158 g
    Propeller
    Material High strength performance engineered plastics
    Dimensions 15 x 5.2" / 381 x 132 mm
    Weight 0.5 oz / 13 g
    Flight Parameters
    Supported Flight Control Systems DJI A2, DJI WooKong-M
    Take-Off Weight 13.3 to 24.2 lb / 6 to 11 Kg
    Total Weight 9.3 lb / 4.2 Kg
    Battery Requirements Lithium-polymer (LiPo)
    6S
    10,000 to 20,000 mAh
    15C or more
    Maximum Power Consumption 4,000 W
    Hover Power Consumption 1500 W -- at (9.5 Kg) takeoff weight
    Hover Time 15 minutes -- with 15,000 mAh and (9.5 Kg) takeoff weight
    Operating Temperature 14 to 104°F / -10 to 40°C

    Get in touch


    • Media Links HEAD OFFICE
    • Room # M-1, Mezzanine Floor
      Business Arcade, Main Shahrah-e-Faisal
      P.E.C.H.S. Block # 6, Karachi- Pakistan
      Tel: (+92-21) 34385038-39
      Fax: (+92-21)34390630
    • Media Links ISLAMABAD
    • Office # 31, Sprint Floor, Aries Towers, Near Maryam Shadi Hall
      Maain Muree Road Rawalpindi- Pakistan
      Tel: (+92-51) 4575287-88
      Fax: (+92-51) 8311191
    • Media Links LAHORE
    • First floor Plaza #7
      Cavalry Ground
      Lahore-Cantt, Pakistan
      Tel: (+92-42) 36610212 & 36673148
      Fax: (+92-42) 36673149
    • Media Links SADDAR KARACHI
    • SHOP NO 25
      ELahi Centre Preedy Street
      Saddar, Karachi, Pakistan
      Tel: 021-32752512
      Fax: (+92-42) 36673149

    Copyright © Media Links 2015. All rights reserved.