Sennheiser (e 912 S) condenser microphone with half-cardioid

    • Programmable membrane switch
    • Very unobtrusive due to flat design
    • Extremely rugged sound inlet basket
    • Rubber damping plate on base
    • Mounting slots for mounting the microphone to table tops, lecterns, etc.
    • Gold-plated XLR connector
    • Integrated electronics (instead of in-line preamp)
    • An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)
    • The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).



    The e 912 S is a high-quality, pre-polarised condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns.

    The e 912 S can be switched on and off via an integrated membrane switch.

    Features:
    • Programmable membrane switch
    • Very unobtrusive due to flat design
    • Extremely rugged sound inlet basket
    • Rubber damping plate on base
    • Mounting slots for mounting the microphone to table tops, lecterns, etc.
    • Gold-plated XLR connector
    • Integrated electronics (instead of in-line preamp)
    • An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)
    • The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).
    • The e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up. For this reason, the frequency response curve of the e 912 S differs from that of the e 912.
    • With the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear).

    CONNECTORS XLR-3
    WEIGHT 550 g
    FREQUENCY RESPONSE 20 Hz - 20 kHz
    SENSITIVITY 6 (10) mV/Pa Depending on adjusted frequency response curve
    TRANSDUCER PRINCIPLE Pre polarised condenser microphone
    SOUND PRESSURE LEVEL 134 dB SPL max (passiv)
    DIMENSIONS 126.5 x 105 x 26.5 mm
    NOMINAL IMPEDANCE less than 100 ?
    MIN. TERMINATING IMPEDANCE 1 k ?
    EQUIVALENT NOISE LEVEL 26 dB (A)
    PHANTOM POWERING P48
    PICK-UP PATTERN Half-cardioid
    POWER CONSUMPTION 2.8 mA

    Get in touch


    • Media Links HEAD OFFICE
    • Room # M-1, Mezzanine Floor
      Business Arcade, Main Shahrah-e-Faisal
      P.E.C.H.S. Block # 6, Karachi- Pakistan
      Tel: (+92-21) 34385038-39
      Fax: (+92-21)34390630
    • Media Links ISLAMABAD
    • Office # 31, Sprint Floor, Aries Towers, Near Maryam Shadi Hall
      Maain Muree Road Rawalpindi- Pakistan
      Tel: (+92-51) 4575287-88
      Fax: (+92-51) 8311191
    • Media Links LAHORE
    • First floor Plaza #7
      Cavalry Ground
      Lahore-Cantt, Pakistan
      Tel: (+92-42) 36610212 & 36673148
      Fax: (+92-42) 36673149
    • Media Links SADDAR KARACHI
    • SHOP NO 25
      ELahi Centre Preedy Street
      Saddar, Karachi, Pakistan
      Tel: 021-32752512
      Fax: (+92-42) 36673149

    Copyright © Media Links 2015. All rights reserved.