Telephone Hybrids - HY-03 - Series (Analogue)

    • Fully automatic - adapts to varying line conditions and has automatic signal limiting.
    • Local and remote line hold switching - calls can be remotely switched through a mixing console.
    • Momentary or permanent latching remotes can be enabled.
    • Balanced mic/line input - 10k ohm balanced input selectable for 0dBu clean feed line, or microphone level with adjustable gain.
    • Balanced output - 0dBu low impedance balanced output, with output gain adjustment.
    • Mixed output - the output can be a mix of the caller and mic/line input signals for recording both sides of the telephone conversation.
    • Integrated ring detector - automatic call answering after a pre-determined number of rings.


    The analogue HY-03 telephone hybrid is the replacement for the HY-02, which for many years has set the standard as an excellent value, high quality telephone hybrid.

    Technical Specification For HY-03

    Audio Specification

    Input Impedance - Line Mode (Clean Feed): 10kΩ balanced 0dB
    Input Impedance - Microphone Mode: 200Ω balanced
    Clean Feed Limiting Input: +4dBu
    Microphone Level Range: From 74dB to 40dB adjusted by preset pot
    Bandwidth to Telephone Line: 250Hz - 4kHz, -3dB ref 1kHz
    Telephone Line Impedance: Nominally 600Ω
    Telephone Line Impedance Range: 300Ω to 1500Ω
    Output Impedance: 50Ω balanced floating 0dBu
    Output Level Range: +8dB to -14dB adjusted by preset pot
    Rejection Ratio: 45dB on 1kHz tone, typically 28dB on complex waveforms, reference peak level of 0dB
    Ring Detector Sensitivity: 1 ring to 6 rings
    Power: 230V 50Hz, or 115V 60Hz. 6W for HY-03.
       

    Connections

    Mic/Line Input: XLR 3 pin female with push button mic/line selection
    Line Output: XLR 3 pin male
    Telephone Line: RJ11 6/4 socket
    Telephone Handset/Instrument: RJ11 6/4 socket
    Remotes: 9-way D-type socket
    Power: IEC mains (CEE22)
    Each unit is supplied with 1 x RJ11 to RJ11 telephone line lead, 1 x RJ11 to BT plug telephone line lead, 1 x BT handset socket to RJ11 plug adapter, IEC mains lead fitted with moulded mains plug, handbook and warranty card.
     
    Order Code     Description
    Height
    Width
    Depth*
    Total Nett
    Weight
    Total Gross Weight
    HY-03     Automatic analogue TBU, free standing
    4.5cm
    1.8”
    21.8cm
    8.6”
    17.5cm
    7”
    1.25kg
    2.75lbs
    2.0kg
    4.4lbs
          HY-03 boxed
    6cm
    2.4"
    34cm
    13.4"
    27cm
    10.6"
       
    *Depth is measured from the front to the end of the connectors fitted to the back of the unit.
    Note: If you are ordering the HY-03 for use in the USA, add the word “US” after the product code. If you are using the HY-03 with the Broadcast Bionics PhoneBox system, then add the word ”BB” after the product code. The HY-03 uses different circuitry for these systems.
     

    Get in touch


    • Media Links HEAD OFFICE
    • Room # M-1, Mezzanine Floor
      Business Arcade, Main Shahrah-e-Faisal
      P.E.C.H.S. Block # 6, Karachi- Pakistan
      Tel: (+92-21) 34385038-39
      Fax: (+92-21)34390630
    • Media Links ISLAMABAD
    • Office # 31, Sprint Floor, Aries Towers, Near Maryam Shadi Hall
      Maain Muree Road Rawalpindi- Pakistan
      Tel: (+92-51) 4575287-88
      Fax: (+92-51) 8311191
    • Media Links LAHORE
    • First floor Plaza #7
      Cavalry Ground
      Lahore-Cantt, Pakistan
      Tel: (+92-42) 36610212 & 36673148
      Fax: (+92-42) 36673149
    • Media Links SADDAR KARACHI
    • SHOP NO 25
      ELahi Centre Preedy Street
      Saddar, Karachi, Pakistan
      Tel: 021-32752512
      Fax: (+92-42) 36673149

    Copyright © Media Links 2015. All rights reserved.